
Features- Industrial-duty US-made Baldor motor
- Capacitor start motor with built-in thermal overload
- Less than 5 PPM oil carry-over (blow-by) rating
- 145-175 working PSI
- Pump RPM: 1310
The Price Was:

Features- Powerful 2.0 HP (Rated/Running) Motor
- Direct Drive Pump/Motor for efficient operation
- 10.0-Gallon Steel Vertical Tank with Wheels
- 4.30 CFM at 40 PSI-3.50 CFM at 90 PSI-Max 125 PSI
- Oil Lubricated Pump for less wear and longer life
The Price Was:
$220.00

Features- Heavy-Duty cast-iron cylinder
- Splash lubrication to ensure longer pump life
- Overload protection with manual reset
- Mounted on dolly Cart With Wheels For Easy Maneuvering
- Factory tested safety relief valve
The Price Was:
$370.00

Features- Lightweight and Compact - Only 23lbs
- Recessed gauges
- Roll cage design protects vital components
- Electric, direct drive, oil-free pump
- Overload protection with manual reset
The Price Was:
$176.80

Features- For 2 HP Motor
- Rated pressure: 115 PSI
- Max 140PSI
The Price Was:
$1,296.00

Features- For 2 HP Motor
- Rated pressure: 115 PSI
- Max 140PSI
The Price Was:

Features- Honda 163cc engine with low oil shutdown
- 13.2 CFM @ 90 PSI; 12.7 CFM @ 130 PSI
- 20-gallon ASME-certified tank
- Pump has durable cast iron cylinder for long life
- Aluminum pump head dissipates heat
The Price Was:

Features- 1 hour charger for 7.2-Volt to 18-Volt DEWALT battery packs except UniVolt
- Runs off of 7.2-Volt to 18-Volt DEWALT batteries making it a cordless radio
- The DEWALT 3-stage charging system provides maximum run-time and extends overall life of the battery
- Power outlets offer more versatility for job site power
- AM/FM digital tuner, LCD display, built-Inch clock, 15 station presets, weather resistant speakers with dual bass ports
The Price Was:
$149.00

Features- Cast iron, V-twin cylinder, oil lubricated pump
- Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application
- 20-Gallon ASME vertical portable tank equipped with pneumatic tires for maximum portability
- Equipped with quick-set regulator, tank and working pressure gauges, quick connect air outlet and on/off switch
- Maximum pressure: 135 PSI; CFM at 90 PSI: 5.3; CFM at 40 PSI: 6.2; RHP: 1.6; UL and CSA certified
The Price Was:
$599.99

Features- Heavy duty air compressor
- Maximum working pressure 150 PSI
- 30 minute duty cycle
- Overheating protection circuit
- Complete with carrying cse
The Price Was:
$259.99

Features- Save time and money, and help improve the environment, with proper tire inflation
- Store or use in upright or flat position
- Plugs into cigarette lighter or 12 volt port
- Ideal for quick and easy inflation of vehicle tires, bike tires, sports balls
- 3 inch digital gauge monitors inflation progress
The Price Was:
$94.99

Features- Cast iron twin cylinder oil lubricated pump
- Heavy duty, spread voltage, induction motor allows unit to run on 208 or 240-Volt without any wiring changes
- 155 PSI max pressure for optimum tool performance
- Large capacity, 60-Gallon ASME air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc
- Maximum pressure: 155 PSI; CFM at 90 PSI: 11.5; CFM at 40 PSI: 13.4; RHP: 3.7; UL and CSA certified
The Price Was:
$779.99

Features- Heavy duty CAST IRON oil lubricated twin cylinder pump
- High air flow to power a wide variety of air tools
- Product life of up to 5000 hours based on b-10 bearing rating
- Quietest operation
- Durable and safe 60 gallon ASME code tank for greater air storage
The Price Was:
$889.99

Features- Perfect for constructing a deck or fencing, installing crown molding, baseboards, hardwood flooring and much more
- Oil free compressor pump delivers high performance and no maintenance
- 6-Gallon tank for extended use and fewer cycles with oversized easy to read gauges
- Two never-flat, ultra durable polymer wheels for ultimate portability
- Includes a 2-in-1 Brad Nailer/Stapler, 3/8-inch Ratchet, 1/2-inch Impact Wrench, 7-piece; Air fitting Kit, and 25-foot recoil hose
The Price Was:
$299.99

Features- Complete Portable Air System
- 10 LB C02 Capacity Tank equals 640 Gallons Of Shop Air
- Hyper Flow Max 200 PSI Regulator. Adjustable for 0-200 PSI
- HI-GLO Powder Coated Tank and Vehicle Mount Bracket
- 20' COMP-FLEX Hose with quick Connect and Tire Chuck
The Price Was:
$429.00

Features- ARB On-Board High Performance 12 Volt Air Compressor
The Price Was:
$351.97

Features- Durable oil-free pump for long life and no maintenance
- Low Amp 120-volt motor starts easily in cold weather or with extension cord
- 2.5 gal Hotdog style tank is easy to carry, includes water drain valve and rubber feet
- 150 psi max tank pressure stores more air in the tank for longer tool runtimes
- 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217 Only 24 lbs for easy portability
The Price Was:
$328.94

Features- Powered by 2-HP motor
- Two-stage cast iron pump
- Vertical tank offers 30-Gallon capacity
- Semi-pneumatic wheels for moving
- 5,000 hours of pump life
The Price Was:

Features- Low maintenance, oil free, direct drive pump, patented-two piece cooling system extends life of the pump
- 5-horsepower Honda OHC/OHV premium residential gas engine
- Max pressure of 155 PSI for optimum tool performance
- Pontoon-style tank design with two 2-gallon tanks for job-site portability
- Maximum CFM at 90 PSI of 5.0, CFM at 40 PSI of 6.9
The Price Was:
$949.99

Features- Ultra Quiet - Only 60 decibels - Less Noise than someone talking!
- Oil-Free - No Maintenance - 3000 hour life cycle
- Powerfull 1.0 Hp Rated/Running and 2.0 Hp Peak
- 3.80 CFM @ 40 PSI & 2.35 CFM @ 90 PSI - Max 120 PSI
- 1.6 Gallon Aluminium Tank - Lightweight 35 lbs - Rust Free
The Price Was:
$280.00

Features- 4.0 CFM delivered at 90 PSI pump provides rapid recovery
- Oil lubricated pump improves durability
- Cast iron cylinder enhances pump life
- High-flow regulator for increased performance
- 4 gallon twin stack tank design with proven acceptance in the market; Dual soft start valves assist in cold weather start up
The Price Was:
$520.30

Features- Designed for maximum maneuverability on the job site
- Durable cast iron construction
- 100% continuous duty cycle for tough applications
- 5.7 acfm at 90 psi
- 8 gallon twin tanks
The Price Was:
$943.00

Features- Oil free, low maintenance operation
- Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
- 3-Gallon tank is lightweight and portable, goes most anywhere
- Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
- Maximum pressure: 125 PSI; CFM at 90 PSI: 2.0; CFM at 40 PSI: 3.0; RHP: 1.0; UL and CSA certified
The Price Was:
$189.99

Features- 4.0 CFM delivered at 90 PSI to provide rapid recovery
- Oil-lubricated pump improves durability
- Cast-iron cylinder enhances pump life
- High-flow regulator for increased performance
- Four-gallon twin-stack tank design with proven acceptance in the market
The Price Was:
$546.33

Features- Single stage pump with ball bearings
- Cast-Iron cylinder
- Stainless steel reed valves and splash lubrication ensure longer pump life
- Can Produce 3.5 CFM of Air
The Price Was:
$259.00

Features- Ideal for heavy duty home or garage use
- Reliable, long-lasting pump
- Features cast iron, oil lubricated pump
- 125 max PSI
- 1.3 HP pump
The Price Was:
$199.99

Features- Nine cubic feet per minute at 100 psi
- Equipped with Honda GX160 engine
- Sturdy 5.5-horsepower motor
- Oil sight glass to monitor oil level
- Pneumatic tire for easy maneuverability
The Price Was:
$1,353.33

Features- Oil lubricated pump with cast iron cylinders provides over 1500 running life hours
- 4.0 SCFM delivered at 90 PSI pump, 4.0-Gallon tank and 125 max PSI enables more nails to be fired and provides quicker recovery
- Dual soft start valves assist in cold weather start up
- Universal push-to-connect coupler for ease of operation
- Utilizes Emglo's 50 years of expertise in air compressors
The Price Was:
$470.00

Features- Vertically Angled Tanks-Enables better center of gravity for easy transport through-out the jobsite
- EZ Drain - One ball valve drain located in control panel for simultaneous draining of both tanks.
- Roll Cage - for maximum durability and protection from job-site conditions
- Recessed Control Panel-All gauges, regular, couplers, safety valve and drain valve are located in easy to access location and are protected from job-site conditions.
- Oil Lubed Pump-Extends product life for extra durability.
The Price Was:
$654.00

Features- Powerful 2.5 HP motor is rated for continuous duty use
- Cast iron pump cylinder with splash lubrication ensures long service life
- Heavy duty wheels and integrated handle make it a breeze to transport and maneuver
- Handle folds down for easy storage and added mobility
- Control panel features air gauges, 2 couplers and regulator
The Price Was:
$555.00

Features- Oil-free pump
- Pontoon-style tank provides a low center of gravity and reduced tip-over
- Rugged roll cage for jobsite durability
- Recessed gauges
- Extremely quiet and lightweight
The Price Was:
$236.30

Features- Reliable, long-lasting pump
- Ideal for heavy-duty home or garage use
- Three-horsepower motor
- 125 maximum PSI
- 4.1 CFM at 90 PSI
The Price Was:

Features- 165 psi max pressure, 4 gallon tank for longer tool runtimes in a more compact, lighter design
- Oil-free pump for no oil spills/contamination and maintenance-free operation
- Low Amp 120V motor starts easily in cold weather or with extension cord
- Only 29 lbs for easy portability
- 75.5 dBA (per ISO3744) for a quieter work environment
The Price Was:
$340.69

Features- VIAIR 450C model air compressor with maximum working pressure rated at 150 PSI and 20 Amp draw
- Oil-less design, with a gearless direct drive permanent magnetic motor, heavy duty PTFE piston ring and precision durable bearings for increased piston and motor life
- CFM @ 0 PSI - 1.66 / CFM @ 100 PSI - 0.94
- 100 percent duty cycle
- Kit includes 450C compressor, mounting hardware with vibration isolators, freeze-resistant wiring, remote mount air filter assembly, air line for remote mounting air filter, heavy duty terminals and more
The Price Was:
$216.95

Features- 7.6 Cu. Ft. Displaced, 3.6 Cu. Ft. Free Air at 100 PSI
- Heavy duty pump
- Intake filter silencer
- Single stage with ball bearings, Splash lubrication
- Stainless steel reed valves to ensure longer pump life
The Price Was:
$277.00

Features- Heavy-duty 4.5 gallon, 200 PSI hand-carry compressor
- Like new, factory-reconditioned compressor
- Constructed to withstand harsh job-site conditions
- Useful for carpenters and remodelers
- Oil- and maintenance-free pump
The Price Was:
$395.20

Features- Ultra Quiet only 60 Decibels
- Oil-Free Pump for Less Maintenance and Costs with Extra Long Pump Life of over 3000 Hours
- Powerful 1.0 HP (Rated/Running) 2.0 HP (Peak) Motor-7.6 Amps
- 3.80 CFM at 40 PSI-2.35 CFM at 90 PSI-Max 120 PSI
- 1.6-Gallon (Rust Free) Aluminum Tank-Lightweight for easy transporting-35-Pound
The Price Was:
$250.00

Features- Direct Drive Motor
- Cast Iron Sleeve / Cast Iron Head Cylinder
- Oil-Splash Lubrication
- Standard equipment includes 1/4" universal coupler regulator, pressure gauge.
- Delivers 2.4 cfm at 100psi
The Price Was:
$224.60

Features- Electric, hand-carry design
- Oil-less
- Weighing in at only 38-pounds
- 2.5-gallon tank storage.
- 135 PSI max pressure
The Price Was:
$199.00

Features- Only 60 decibels
- Oil-Free
- Lightweight
- Portable
The Price Was:
$290.00

Features- Ultra Quiet - Only 70 decibels - 30% less than other brands
- Oil-Free - No Maintenance - 3000 hour life cycle
- Powerfull 2.0 Hp Rated/Running
- 7.00 CFM @ 40 PSI & 5.30 CFM @ 90 PSI - Max 125 PSI
- 4.6 Gallon Aluminium Tank -64 lbs - Rust Free
The Price Was:
$320.00

Features- 100 PSI maximum pressure
- Oil-free pump means no maintenance
- Tank and output pressure gauges for viewing accurate air settings
The Price Was:
$99.99

Features- 3 gallon tank with drain valve
- Built-in accessory storage
- Easy-to-read pressure gauge (100 PSI maximum)
- Thermal overload protection
The Price Was:

Features- Ultra Quiet - Only 56 decibels - Less Noise than someone talking!
- Oil-Free - No Maintenance - 3000 hour life cycle
- Power 1/2 Hp Rated/Running and 1.0 Hp Peak
- 1.90 CFM @ 40 PSI & 1.10 CFM @ 90 PSI - Max 120 PSI
- 1.6 Gallon Aluminium Tank - Lightweight 31 lbs - Rust Free
The Price Was:
$230.00

Features- 120V 60Hz
- 3.5 HP
- Max PSI 115
- 4.2 CFM @ 90
- 5.2 CFM @ 40
The Price Was:
$249.95

Features- 200 PSI max pressure allows for longer air tool run time
- 4.8 SCFM at 90 PSI allows for quick compressor recovery time
- 78 dBA (tested per ISO3744) operational noise level for a quieter work environment
- EHP efficient high-pressure technology delivers exceptional air-tool runtimes
- Oil-free, maintenance-free pump for convenient use
The Price Was:
$710.42

Features- Powerful 1.5 HP motor features automatic start/stop operation for easy use
- 155 psi maximum pressure
- Delivers 2.5 SCFM at 90 psi
- Oil-free pump means no maintenance
The Price Was:
$129.99

Features- CFM @ 100 PSI: 4.0
- Power: 2 HP
- RPM: 3400
- Tank Size: 4.3
The Price Was:
$332.00

Features- 4.0 CFM delivered at 90 PSI pump provides rapid recovery
- Oil lubricated pump improves durability
- Cast iron cylinder enhances pump life
- 10-inch pneumatic wheel and handle kit for ease of mobility
- Top load panel with positioning holes allows unit to transport loads up to 100 lbs; High-flow regulator for increased performance
The Price Was:
$633.31

Features- Oil-free pump requires less maintenance
- 2.8 CFM at 90 PSI with 150 maximum operating pressure for improved tool performance
- Large six gallon reserve tank with ball-type drain valve for easy drainage
- Impact-resistant composite shroud protects gauges against jobsite damage
- Weighs only 38 lbs. for portability
The Price Was:
$199.99