Features- 17 Gallon Tank, 150 Max PSI, 16.3 SCFM Pump delivers the surge air power and recovery needed to run extra nailers over standard 8 hp, 8 gallon
- DEWALT 270-cubic centimeters, OHV engine with low oil shut off for engine protection
- 18-volt Battery start (with battery and charger) for easy engine starting
- Long life cast iron pump utilizes 4-cyclinder design for high air output
- Metal panel protects the controls and pump; Large 10 (254 mm) semi-pneumatic tires for balanced, puncture resistant job site mobility
The Price Was:
$3,295.78
Features- Cast iron, industrial duty, two stage compressor pump delivers maximum CFM at 175 PSI; provides enough power to operate more than one air tool or device at one time
- Industrial class electric motor equipped with pre-wired and mounted magnetic starter - saves time and money
- Uniquely designed metal belt guard improves compressor pump cooling by as much as 60-Degree Fahrenheit over other belt guard designs
- Large capacity 80-Gallon ASME certified tank
- Maximum pressure: 175 PSI; CFM at 175 PSI: 17.0; CFM at 100 PSI: 17.9; RHP: 7.3; voltage: 240
The Price Was:
$2,599.99
Features- Sturdy tires for easy handling and maneuverability
- Convenient oil drain on front of unit
- High efficiency reed valves for maximum performance
- Efficient heat removal from pulley-fan for cooler running and longer life
- Sturdy metal belt guard and outlet valve and regulator included
The Price Was:
Features- 60 Gallon Capacity
- Includes Base Ring & Top Plate
- ASME Rated Tank
- Please call 800-658-3579 for higher PSI or Tank over 240 Gallons
- MAWP:200PSI
The Price Was:
Features- Locking pull-out handle provides leverage for maximum mobility
- 10 inch (25.4 cm) pneumatic wheels and tires for tough terrain
- Recessed gauges, roll cage design
- Electric, direct drive, oil splash pump
- 3450 RPM motor
The Price Was:
$440.30
Features- Industrial-duty US-made Baldor motor
- Industrial-duty general-purpose mounted and wired magnetic starter
- Less than 5 PPM oil carry-over (blow-by) rating
- 145-175 working PSI
- Pump RPM: 942
The Price Was:
FeaturesThe Price Was:
FeaturesThe Price Was:
$902.74
Features- Lightweight, compact and extremely portable. Single stage, direct coupled, oil lubricated pump.
- Cast iron cylinder for extended pump life. Aluminum head for better heat dissipation.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Canister inlet filter with replaceable filter elements. Forced ventilation cooling system.
- Start/Stop pressure switch control set. Thermal overload motor protection with mannual reset
The Price Was:
$547.00
Features- Lightweight, compact and extremely portable. Single stage, direct coupled, oil lubricated pump.
- Cast iron cylinder for extended pump life. Aluminum head for better heat dissipation.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Canister inlet filter with replaceable filter elements. Forced ventilation cooling system.
- Start/Stop pressure switch control set. Thermal overload motor protection with mannual reset
The Price Was:
$3,767.00
Features- Industrial-duty US-made Baldor motor
- Industrial-duty general-purpose mounted and wired magnetic starter
- Less than 5 PPM oil carry-over (blow-by) rating
- 145-175 working PSI
- Pump RPM: 942
The Price Was:
Features- 3 Year Warranty
- 7-1/2 H.P., 240V motor doesn't slow down
- Delivers an amazing 25.1/27.2 CFM at 175/90 PSI
- Includes a pressure switch, pressure gauge, oilsight and relief value
- Vertical 80-gallon ASME tank
The Price Was:
$1,699.95
Features- 21 Amp 5 HP 80-gallon cast iron oiled 2-stage vertical compressor provides up to 10,000 hours of pump life
- Ideal for automotive and job site tasks
- 2-stage 2-cylinder, and oil-lubricated cast iron pump for long life and durability
- Offers oil sight gauge, high airflow, and 175 maximum PSI
- 5-year limited manufacturer's warranty
The Price Was:
$1,596.19
Features- Lightweight, compact and extremely portable. Single stage, direct coupled, oil lubricated pump.
- Cast iron cylinder for extended pump life. Aluminum head for better heat dissipation.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Canister inlet filter with replaceable filter elements. Forced ventilation cooling system.
- Start/Stop pressure switch control set. Thermal overload motor protection with mannual reset
The Price Was:
$547.00
Features- Cast Iron Pump for longer life
- 5.6 CFM at 90 PSI
- Wheels for easy moving and storage
- Great for any shop or home
- Outlet control regulator with quick connectors
The Price Was:
Features- Cast iron construction
- Start/stop pressure control
- Fully enclosed belt guard
- Thermally protected electric motor
- Easy-to-view oil sight glass
The Price Was:
Features- 1.6 HP oil-free direct drive induction motor is durable with a long life and has no belts or pulleys to change or maintain, and no oil to check or change
- Low-voltage start-up allows the compressor to be operated on extension cords
- Equipped with an unregulated port that is compatible with the patented H4X remote air hub
- 6.1 CFM at 40 PSI 5.1 CFM at 90 PSI
- 150 max PSI
The Price Was:
$299.00
Features- High air flow, single stage - 14 CFM at 90 PSI - cast iron, three cylinder, oil lubricated pump
- 208-240 Spread voltage motor includes fully wired, 20-AMP, 12-Gauge, 6-Feet power cord
- 155 PSI max pressure for optimum tool performance
- Large capacity 60-Gallon ASME air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc
- Maximum pressure: 155 PSI; CFM at 90 PSI: 14.0; CFM at 40 PSI: 16.1; RHP: 4.7; UL and CSA certified
The Price Was:
$1,299.99
Features- Tank compressor with a rugged cast-iron pump provides up to 3,000 hours of extended life
- Oil-lubricated pump has a traditional design that is quieter and longer lasting
- High 5 hp peak motor meets tough end-user demands while operating on standard 120/240 volt service
- Durable and safe 20-gallon ASME code tank for abundant air storage
- 35.1 by 19.5 by 30.5-Inch; 148.8 pound
The Price Was:
$599.99
Features- Oil free, low maintenance operation
- Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
- Fully enclosed shroud to protect the pump and motor
- Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
- Maximum pressure: 125 PSI; CFM at 90 PSI: 3.5; CFM at 40 PSI: 4.8; RHP: 1.5; UL and CSA certified
The Price Was:
$349.99
Features- Cast iron, industrial duty, two stage compressor pump delivers maximum CFM at 175 PSI; provides enough power to operate more than one air tool or device at one time
- Heavy duty industrial type motor protects the motor from voltage fluctuations so no magnetic starter is required
- Equipped with integrated control panel for added control and convenience
- Large capacity 80-Gallon ASME air receiver
- Maximum pressure: 175 PSI; CFM at 175 PSI: 15.8; CFM at 100 PSI: 17.5; RHP: 5.2; voltage: 208-240
The Price Was:
$1,799.99
Features- 1/3 Horsepower
- 3 Gallon
- 100 PSI
- Oilless Pancake Air Compressor
- Thermal Overload Protection
The Price Was:
$79.99
Features- Low Noise Air Compressor
- Low Vibration
- Low Maintenance
- Oil-Less Compress
- Great for Dental, Tatoo, and Etc.
The Price Was:
Features- CFM @ 100 PSI: 6.9
- Power: 1.5 HP
- RPM: 790
- Tank Size: 8
The Price Was:
$982.00
Features- TWIN STACK COMPRESSOR
- 2 HP.
- Volt: 110.
- 4.1 cfm @ 100 psi.
- Stainless discharge hose.
The Price Was:
Features- TWIN STACK COMPRESSOR
- 2 HP.
- Volt: 110.
- 4.1 cfm @ 100 psi.
- Stainless discharge hose.
The Price Was:
$445.99
FeaturesThe Price Was:
$31.99
Features- Quiet operation
- Great for punch-out, trim, finishing or other indoor jobs
- 1-gallon low-profile tank allows for easy storage and travel
- Lightweight at only 19 lbs.
- 0.5 HP induction motor provides longer life than universal motors
The Price Was:
$193.20
Features- 9 HP Honda OHV gas engine with electric start has an automatic low oil shutdown
- High performance cast iron 3 cylinder pump
- 2 center mount turf tread semi-pneumatic tires for increased mobility
- Enhanced structural support under platform transfers vibration to the ground
- Integrated control panel for added control and convenience
The Price Was:
$1,997.86
Features- Oil-less, direct drive pump
- Single stage, 2 HP, 14.2 amp (115 V) electric motor
- Capacitor start and capacitor run motor for long life
- 1,000 hour pump life
- Minimum air delivery = 8.3 cfm at 40 psi and 6.1 cfm at 90 psi
The Price Was:
$791.17
Features- 8 Gallon tank allows user to handle Heavy duty tasks
- Cast Iron cylinder, for long lasting, heavy duty reliable performance.
- Oil-Lubricated pump for robust use and long life.
- High flow regulator for those large volume air needs.
- Oil site-gauge for easy product maintenance.
The Price Was:
$296.00
Features- Heavy duty induction motor for maximum performance and efficiency
- 155 psi max pressure for optimum tool performance
- 30-Gallon ASME
- Dual voltage motor is wired for standard 120 volt outlet, and may also be converted for 240 volt application
- Fully assembled and equipped with quick-set regulator, tank and tool pressure gauges, quick connect air outlet and on/off switch for ease of use
The Price Was:
$574.99
Features- 1/2 Hp Air Compressor Pump/Motor
- 1.90 CFM @ 40 PSI & 1.10 CFM @ 90 PSI - Max 120 PSI
- Ultra Quiet - Only 56 Decibels
- Low Amp Draw - 4.5 Amps
- Oil-Free - No Maintenance - 3000 hour lifecycle
The Price Was:
Features- Dual white-face gauge and standard-duty compressor
- Ideal for light use on off-center loads
- Kit includes dual gauge, compressor, air line, fittings, filter and fasteners
The Price Was:
$477.72
Features- 1/2 Hp Air Compressor Pump/Motor
- 1.90 CFM @ 40 PSI & 1.10 CFM @ 90 PSI - Max 120 PSI
- Ultra Quiet - Only 56 Decibels
- Low Amp Draw - 4.5 Amps
- Oil-Free - No Maintenance - 3000 hour lifecycle
The Price Was:
$230.00
Features- Alton 2-Gallon hotdog oil-free air compressor
- Perfect for air-brushing, inflation, stapling and other tasks
- Small tank size allows for convenient portability and storage
- Plastic shroud prevents excessive heat; easy-to-read gauges provide precise control
- Compact design, Flip-up cushioned handle for easy transport
The Price Was:
$105.00
Features- Cast iron, twin cylinder, oil lubricated pump
- Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application
- 155 PSI max pressure for optimum tool performance
- 30-Gallon ASME vertical portable tank with pre-attached pneumatic tires, quick-set regulator, tank and working pressure gauges and on/off switch
- Maximum pressure: 155 PSI; CFM at 90 PSI: 5.7; CFM at 40 PSI: 7.0; RHP: 1.9; UL and CSA certified
The Price Was:
$749.99
Features- Perfect compressor for home usage
- Lightweight and easy to carry
- Maintenance free oil less pump
- Includes 25 ft recoil hose
The Price Was:
$129.99
Features- Features a cast-iron, oil-lubricated pump for solid, reliable performance
- Quiet operation @ 75-80dB
- Equipped with a pressure switch, pressure gauge, regulator, safety valve, and six-foot power cord
- Meets OSHA standards
The Price Was:
Features- Industrial-duty US-made Baldor motor
- Capacitor start motor with built-in thermal overload
- Less than 5 PPM oil carry-over (blow-by) rating
- 145-175 working PSI
- Pump RPM: 1310
The Price Was:
